Power | 40W | |
Material | Die-cast Aluminum | |
LED Chip | Luxeon 3030 | |
Light Efficiency | >100lm/W | |
CCT: | 3000-6500k | |
Viewing Angle: | 120° | |
IP | 65 | |
Working Environment: | 30℃~+70℃ |
Module | 120W | |
Encapsulation | Glass/EVA/Cells/EVA/TPT | |
Efficiency of solar cells | 18% | |
Tolerance | ±3% | |
Voltage at max power(VMP) | 18V | |
Current at max power(IMP) | 6.67A | |
Open circuit voltage(VOC) | 22V | |
Short circuit current(ISC) | 6.75A | |
Diodes | 1by-pass | |
Protection Class | IP65 | |
Operate temp.scope | -40/+70℃ | |
Relative humidity | 0 to 1005 | |
Warranty | PM is not less than 90% in 10 years and 80% in 15 Years |
Rated Voltage | 12V |
|
| |
Rated Capacity | 80 Ah | |||
Approximate Weight(kg,±3%) | 25KG | |||
Terminal | Cable(2.5mm²×2 m) | |||
Maximum Charge Current | 10 A | |||
Ambient Temperature | -35~55 ℃ | |||
Dimension | Length (mm,±3%) | 329mm | ||
Width (mm,±3%) | 172mm | |||
Height (mm,±3%) | 214mm | |||
Case | ABS | |||
Warranty | 3years |
Rated working voltage | 10A DC12V | |
Max. discharging current | 10A | |
Max. charging current | 10A | |
Output voltage range | Max panel/ 12V 150WP solar panel | |
The precision of constant current | ≤3% | |
Constant current efficiency | 96% | |
levels of protection | IP67 | |
no-load current | ≤5mA | |
Over-charging voltage protection | 12V | |
Over-discharging voltage protection | 12V | |
Exit over-discharging voltage protection | 12V | |
Turn on voltage | 2~20V | |
Size | 60*76*22MM | |
Weight | 168g | |
Warranty | 3years |
Material | Q235 |
|
Height | 7M | |
Diameter | 80/170mm | |
Thickness | 3.5mm | |
Light Arm | 60*2.5*1500mm | |
Anchor Bolt | 4-M18-700mm | |
Flange | 320*320*14mm | |
Surface Treatment | Hot dip galvanized+ Powder Coating | |
Warranty | 20 Years |